Do It Yourself Auto Repair

Posts Tagged ‘Paint’

Pete and Minnie get a good start on wet sanding the Streetbeasts Coupe on a Cold Day In TEXAS. www.swrnc.com or 972-420-1293
Video Rating: 4 / 5

What is the differance. www.swrnc.com or 972-420-1293
Video Rating: 4 / 5

Blend Blend Blend. www.swrnc.com or 972-420-1293
Video Rating: 4 / 5

Use your tools. www.swrnc.com or 972-420-1293
Video Rating: 4 / 5

Ready For Paint. www.swrnc.com or 972-420-1293

Removing Emblems. www.swrnc.com or 972-420-1293

How To Straighten Sheet Metal With The Least Amount Of Effort Possible (Collision Blast Basic Auto Body and Paint Training)

ABOUT THE E-BOOK

By reading this book you will learn how to repair and straighten metal. There is a method, which many people don’t follow to properly repair the metal back it’s original shape. You will learn tips and tricks that has taken me years to achieve. While some teachings make it difficult with big words, I keep it simple and easy to understand. I provide metaphors that will help you remember the important steps, which are the same steps others may overlook and never ful

List Price: $ 6.99

Price:

More Auto Repair Products

Dismantal everything. www.swrnc.com or 972-420-1293
Video Rating: 4 / 5

CollisionBlast.com – Click the link to the left to watch how to blend and clear coat. ABRN, Buter Community College and Ohio Technical College have partnered together to bring you auto collision repair and car painting tips. In this video we’re going to discuss and demonstrate how to spray primer sealer and base coat. We have already prepped an OEM fender by sanding with 500 grit on a DA with a soft pad and surfing the edges with a maroon scuff pad. Method 1 Painting the part before it is installed onto the vehicle is one of two methods that we practice at Butler. This allows the painter to paint the part with less masking, which makes a smother and cleaner finish. The problem with this methods is that care must be taken when installing the part without damaging the new painted surfaces. Normally, adjacent panels will still require blending to provide an invisible repair. Method 2 The second way that we practice is to edge the panel, then install it on the vehicle. Then the panel is masked with the blending area and the panel can be painted while blending the adjacent panels. This makes panel alignment easier and any scuffed made while installing the panel can be easily repaired during the refinish process. Both methods are effective and have pros and cons. However, many shops that I speak to use one or the other method. Therefore, we teach both ways to better prepare the student for the industry.

The Mighty Car Mods team show you how to paint your cars brake calipers to improve the appearance of your mighty ride

This is a 3 stage pearl white mazda that is having a spot repair performed on the front bumper cover. It it being sprayed with BASF RM onyx waterborne paint and RM DC5600 clear coat. The clear coat is blended and polished to an undetectable transition. This repair will hold out well but ideally the entire bumper cover should be painted the highest quality job. This was repaired by blending the clear as the customer requested an economical repair. The price differs from about 5 this way to about 0 to do the entire bumper cover. The way a three stage paint works is the first part of the paint is a solid color sprayed to cover the primer. Once that is done a pearl coat is sprayed overtop to give it a deep pearl effect. It is all topped with a clearcoat and the clearcoat is blended using a clearcoat blender (UBR200). The blender is mixed into some activated clear coat also. The entire job is polished at the end to remove the slight roughness caused from the clear tapering out.
Video Rating: 5 / 5

More info: www.metacog.com
Video Rating: 3 / 5